www.hpmag.co.uk HYDRAULICS & PNEUMATICS July/August 2026 17 of washers: a known dirty component, one washed with old washing fluid, and one washed the day the fluid was changed. Dyne Testing used the SITA Cleanospector to assess the samples. It works by illuminating a metal surface with UV light and measuring the fluorescence from residual organic oils and contaminants, giving an immediate, quantitative indication of surface cleanliness without damaging the part. Cleanliness is expressed in relative fluorescence units (RFU), giving an objective numerical measure that can be tracked, compared, and controlled over time. The samples revealed an issue right away: one side of the components from a specific washer all returned high RFU values, too high to have been cleaned properly. Upon inspection of that washer, Burnside found a broken arm inside the washing chamber and immediately repaired it. “This sort of insight was exactly what we were looking for,” recalled Ryan. “We’d seen the Cleanospector on Dyne Testing’s website during research, so this demonstration convinced us that it could help achieve our quality and traceability goals.” Confidence through visibility Burnside purchased the Cleanospector in March 2025. Fox and Dyne Testing Technical Sales Executive Conor Kelly provided training for the quality team, demonstrating best practice tips for use and discussing how the instrument could best be integrated into the production line. “Conor explained it brilliantly; he kept everything simple and precise. Dyne are great communicators and teachers,” said Ryan. Equipped with the Cleanospector and the training, Ryan began to collect cleanliness data on cylinders across Burnside’s fleet of washing machines. A year on, he has amassed RFU data points across all machines and calculated a baseline cleanliness value. This enabled Burnside to reduce the average number of washer fluid changes per year from 12 down to seven, with plans for further reductions in 2026. This change saves around €7500 per washer annually and ensures that hundreds of litres of viable cleaning fluid are used to the end of their service life, while hydraulic cylinder performance is unaffected, quality standards remain high, and customer safety is maintained. Cylinder stroke count Cylinder stroking is another dimension of the post-manufacturing quality process. Once built, Burnside connects cylinders to a test rig and cycles them, before testing the hydraulic oil from the system. This stroking process flushes out any internal contaminants and fine particles, circulates fresh oil through, and confirms pressure integrity and seal performance. Technicians would stroke cylinders up to 30 times to ensure that oil cleanliness results fell within customer requirements; usually Class 7 or Class 8 from ISO 4406:2021 Hydraulic fluid power — Fluids — Method for coding the level of contamination by solid particles. If it was found to be marginally above tolerance, operators would resume the stroking process to remove more contaminants. This increased stroking time slowed production timescales, taking up to 30 minutes per cylinder. By increasing upstream cleanliness assurance with the Cleanospector, Ryan knew he could improve throughput on this process. Confidence, fuelled by clarity in the washing process, has enabled Burnside to reduce stroking cycles from 30 strokes down to 20 or even 15, saving around ten minutes per batch. For Ryan, the quality framework and the adherence to ISO 4406 provides the consistency and customer reassurance that he searched for after the traceability conversation that began the upgrade process. “Dyne Testing made my week when I could go back to that customer and tell them we had the exact documentation to put their fears to rest,” said Burnside MD Brendan Byrne. “Having Alison and Conor at our disposal to answer questions with great technical knowledge and communication skills has been great,” concluded Ryan. “This technology has opened up lots of opportunities for us at Burnside.” For further information please visit: https://dynetesting.com/productcategory/cleanliness-testing
RkJQdWJsaXNoZXIy MjQ0NzM=