30 | Plant & Works Engineering www.pwemag.co.uk August/September 2026 Handling & Safety Matters Focus on: Health & Safety Despite significant advances in workplace safety, occupational respiratory disease remains one of the UK’s greatest causes of workrelated ill health. The Health and Safety Executive (HSE) estimates that around 11,000 people die each year from occupational lung disease linked to past workplace exposures, while around 22,000 workers develop breathing or lung problems caused or made worse by work annually. While asbestos continues to account for many of these deaths, today’s workforce faces a new generation of respiratory hazards. Respirable crystalline silica (RCS), generated during activities such as cutting concrete, drilling masonry, quarrying, tunnelling and working with engineered stone, is now recognised by HSE as one of the most significant respiratory risks facing the construction industry. Exposure to silica dust can lead to silicosis, chronic obstructive pulmonary disease (COPD) and lung cancer, yet the dust itself is often invisible, making it easy to underestimate the danger. The challenge is that many occupational respiratory diseases have latency periods measured in decades. The statistics we see today often reflect exposures that occurred many years ago, meaning the impact of the decisions we make today may not become fully apparent for a generation. That makes continuous improvement essential. Every step taken to improve awareness, competence and communication has the potential to reduce future disease. Making respiratory protection count For BSIF, the priority has always been helping employers and wearers ensure that when respiratory protective equipment (RPE) is required, it delivers the protection it is designed to provide. Modern respirators are capable of providing exceptionally high levels of protection, but only when they are appropriate for the hazard, fit the wearer correctly and are used as intended. Too often, failures in respiratory protection are not caused by the product itself, but by inappropriate product selection, poor face fit, inadequate training or incorrect use. Helping employers understand these requirements, and giving wearers the confidence to use RPE correctly, has been central to BSIF’s work for many years. That philosophy underpins the refreshed Clean Air? Take Care! campaign. Originally launched 15 years ago, the campaign was created to promote good practice in respiratory protection. Its core message remains as relevant today as it was then: selecting the right equipment is only the first step. Ensuring it is correctly fitted, properly maintained and used correctly is what ultimately protects workers from hazardous airborne contaminants. Reaching people where they work The latest refresh of Clean Air? Take Care! recognises that while the principles of respiratory protection remain the same, the way people access information has changed. Health and safety information is becoming increasingly digital, and rightly so. Online resources are easier to update, can provide greater depth and are available whenever they are needed. However, in the drive to digitalise, we should not lose sight of the value of welldesigned printed guidance. Many of the people who rely on respiratory protection every day work on construction sites, in workshops, factories and engineering environments. They are focused on the job in hand rather than sitting behind a desk. For them, simple, visual guidance that can be kept in a pocket, toolbox or site office remain an effective way of reinforcing key messages at the point of use. That thinking influenced the development of the campaign’s new printed guide. It distils the essential principles of respiratory protection into an easy-to-follow visual format that workers can refer to quickly throughout the working day. QR codes then provide direct access to more Preventing tomorrow’s occupational lung disease The relaunch of the British Safety Industry Federation’s Clean Air? Take Care! campaign comes at an important time for occupational health, explains John Hooker, Chief Executive Officer at the British Safety Industry Federation.
RkJQdWJsaXNoZXIy MjQ0NzM=