In many demanding industrial condition monitoring applications, there is a requirement for robust and reliable transducer systems, for example devices such as accelerometers, velocity sensors and proximity probes which need to meet the challenges. As a result of its 50 years of experience in designing and manufacturing essential monitoring sensors and systems, SENSONICS says it offers not only specialised condition monitoring products, but also the vital engineering and technical capability to deliver custom-designed sensors when required. Its wide range of LVDT (Linear Variable Differential Transformer) displacement transducers will not always meet the specific requirements of some applications and this is when its established bespoke design services make a big difference. Whether for a new application, replacing an obsolete product, or an existing supplier cannot meet your needs, Sensonics has the technical expertise to deliver a cost-effective solution. t| +44 (0) 1442 876833 e| sales@sensonics.co.uk w| www.sensonics.co.uk / https//www.sensonics.co.uk/products/ industrial-sensors/ To ensure the safe, effective and efficient transfer of plant equipment into the basement energy room of a new residential tower block in London, a major construction project leveraged the advantages of appointing Hoist & Winch as its supplier of turnkey lifting equipment. Tasked with meeting the requirements of a technically challenging brief, Hoist & Winch demonstrated why it has become the nation’s go-to solution provider of high-quality lifting systems. Hoist & Winch has extensive experience in all kinds of construction and industrial lifting applications. The company offers sales, installation, service, inspection, repair and hire services, with a special emphasis on project work. Supplying the optimal solution, with safety as the number one priority, is always the objective. During the design phase, after formal tender and contract award, Hoist & Winch set about identifying the optimal solution by carefully assessing the specific lifting requirements. The project required the installation of hoists on both the upper and lower ground floor levels to ensure the successful lifting and transfer of large energy plant. It was clear from the outset that the solution would need to overcome the issue of very tight headroom clearances due to the size of the equipment. After thoroughly considering all aspects of the project, Hoist & Winch was able to put forward its proposal, recommending two William Hacket low-headroom manual hoists, both with a hand-geared trolley. Offering a safe working load (SWL) of 2.5t each, the hoists provide 8m of lifting height and run on beam lengths of 8.5m and 7.0m. Hoist & Winch duly submitted its design proposal, including drawings and structural calculations, for approval by engineers at the main contractor. Following approval, the company commenced manufacture before delivery to site. t| 08450 171126 e| sales@hoistandwinch.co.uk w| www.hoistandwinch.co.uk 34 | Plant & Works Engineering www.pwemag.co.uk June/July 2025 Industry Update Online Calculator Major construction project Industrial process heating equipment and solutions specialist Babcock Wanson UK has announced it is pleased to be a founding member of Electrify Industry, a new body representing businesses seeking to decarbonise the UK’s industrial base through electrification. Electrify Industry, powered by Make UK – the manufacturers’ organisation - is working with innovators to create a voice to ensure that the right policy is developed for electrification, which is considered by many to be the most efficient option to decarbonise the UK industrial sector and enable it to continue to grow. Electrify Industry’s report, A programme for growth in the 21st century, states: “UK industry needs a healthy mix of decarbonisation options to make net zero work – presently this is far from reality. A healthy energy market that embraces electrification and facilitates real decarbonisation technology choices is necessary.” t| 020 8953 7111 e| info@babcock-wanson.com w| www.babcock-wanson.com / www.makeuk.org/insights/reports/electrify-industry Founding member of Electrify Industry Robust, reliable protection Euro-Bearings says selecting the correct size of Combined Roller Bearings just became faster and easier, thanks to the launch of its new Online Calculator. Designed to streamline the engineering process, the Calculator uses Hertzian Pressure to determine the minimum required bearing size when used with the corresponding Euro-Bearings steel profile. The tool provides a direct link to the complete recommended product set—including the bearing, profiled rail, mounting plates, and flange clamp. Whether working on a simple or more demanding application, the calculator supports selection for: Simple Horizontal Applications Vertical (Mast) Applications Horizontal Cantilevered Applications The company says this intuitive tool is ideal for design engineers and buyers who need to specify the product quickly and accurately. Link to Calculator: https://euro-bearings.com/ euro-bearings-calculator.html w| www.euro-bearings.com Magnet thermocouples offer an innovative solution for demanding temperature measurement requirements. Magnets with pull strengths ranging from 0.7kg to 11.8kg offer a wide range of applications across various industries. The pull strength of a magnet refers to the force required to pull it away from a ferrous surface. The availability of magnets with pull strengths spanning this range allows for precise selection based on the specific requirements of each application, ensuring optimal performance and reliability You can now buy Labfacility products through DigiKey and Farnell, our trusted global distributors. t| +44 (0) 1243 871280 / +44 (0) 1909 569446 e| sales@labfacility.com w| www.labfacility.com / https://www.labfacility.com/temperaturesensors/thermocouples-iec/ magnet-thermocouples-iec.html Magnet thermocouples are specialised temperature sensors used in environments where traditional thermocouples face challenges
RkJQdWJsaXNoZXIy MjQ0NzM=