Screw in type K temperature sensors with a measuring range of −75 to +250°C and 1 metre PFA flat pair lead wire. Available with process thread options 1/4 BSPP, 1/2 BSPP & 1/4 & 1/2 NPT for direct mounting into vessels, pipes, tanks, or ducting for liquid or gas temperature measurement. With standard diameters of 3 & 6mm diameter 316 Stainless steel sheath and standard lengths of 50, 100, 150 & 200. * Screw-in options 1/4 BSPP, 1/2 BSPP & 1/4 & 1/2 NPT process threads * Type K Class 1 Thermocouple * Sensor temperature rating −75 to +250°C * 3 & 6mm 316 stainless steel sheath * 50, 100, 150 & 200mm standard lengths You can now buy Labfacility products through DigiKey and Farnell, our trusted global distributors. t| + 44 (0) 1243 871280 / +44 (0) 1909 569446 e| sales@labfacility.com w| www.labfacility.com / https://www.labfacility.com/screw-in-thermocoupletemperature-probes.html Screw In Thermocouple Temperature Probes Industry Update www.sepura-technologies.com Most customers will tell you just how efficient Sepura oil-water condensate units are. But did you know that our patented filtration media found inside every genuine Sepura unit is made from recycled glass bottles? This not only makes the outputs from our units environmentally friendly but also our manufacturing process too. Going green and achieving your targets doesn’t have to be a compromise. Visit our website to learn more about our Silexa™ filtration media t: +44 (0)1543 379212 e: sales@sepura-technologies.com SEPURA™ is part of the Bowman Group Going green takes bottle Oily water in Passes through de-pressurising void and bulk oil removal shred to remove initial large oil deposits SILEXA™ final filter medium 20% more absorbent compared to other OEM products. Outlet port levels less than 5ppm. 1 2 2 1 3 3 4 4 Bubble detecting sensors Helping to protect pumps from running dry and detecting even the tiniest bubbles in flow control applications is a good example of where system engineers need to prevent unwanted and expensive downtime due to pump malfunction caused by unwanted gas inclusions. The development of the PAD20 sensor (a finalist in the recent Food Tec Awards) is a good example of the innovative range of sensors available from BAUMER. This ‘smart’ sensor helps to protect pumps from running dry whilst also helping to ensure maximum system performance and optimum use of resources. However, the PAD20 sensor is not only good at protecting pumps as reliable detection of gas bubbles also optimises the energy efficiency of cooling and heating systems in industrial applications. t| 01793 783839 e|sales.uk@baumer.com w| www.baumer.com/gb/en/ Following the acquisition of Donau Carbon Technologies (DCT) by the Babcock Wanson Group in 2022, industrial process heating equipment and solutions specialist BABCOCK WANSON UK says it has expanded its range of regenerative oxidisers and is now able to offer complete solvent recovery systems to help reduce customers’ carbon foot print and meet increasingly stringent emission limits for solvents and volatile organic compounds (VOC). Babcock Wanson UK has been providing oxidisers for many years but with the addition of DCT regenerative and recuperative oxidisers can now meet a wider range of industries and requirements than ever before. DCT regenerative oxidiser capacities range from 3.000 to 300.000 Nm3/h. They boast low maintenance costs and consistency of performance across their life time. t| 020 8953 7111 e| info@babcock-wanson.com w| www.babcock-wanson.com Expanding environmental solutions
RkJQdWJsaXNoZXIy MjQ0NzM=