updates from www.hpmag.co.uk HYDRAULICS & PNEUMATICS March 2022 41 Contact BCAS at Tel: 020 7935 2464 e-mail: info@bcas.org.uk website: www.bcas.org.uk Control better. BCAS members can advise on the best equipment and system for the application. This could include incorporating fixed and variable-speed drives or a combination of both as well as efficient downstream equipment. Fix leaks. Reducing air leaks can have the biggest impact on overall system efficiency. Leak rates in industrial systems are typically between 20 and 40%, meaning the compressor must work harder, and therefore consume more energy, to compensate for the pressure loss. Recover heat. As much as 95% of the energy consumed by a compressor is converted to heat and, unless captured, will be wasted to the atmosphere. Many manufacturers offer heat recovery systems, which can often be retrofitted. These recycle this excess heat; redirecting the hot oil to an oil-to-water heat exchanger. Manage air downstream. Treating air to remove dirt, water and oil is necessary but can use a lot of energy. The process is likely to only need a proportion of the compressed air to be treated to a very high purity. In these cases, excellent savings are achievable by treating all the generated air to the minimum acceptable level and improving the purity (quality) to the desired level at the usage point. Service and maintenance. Low cost, regular maintenance will help retain low leak rates and reliability of equipment. Operators should consider a policy that specifies that energy efficient options are purchased when replacing all equipment – whether it is a basic drain valve through to the actual compressor unit itself equipment. For further information, please visit: taskforce10.bcas.org.uk Compressed air, gas and vacuum solutions HOW RELIABLE IS YOUR PROCESS AIR SOLUTION? EFFICIENT, SAFE AND SMART PROCESS AIR SOLUTIONS Wide and durable blower and compressor portfolio Maximum process reliability, safety and e ciency Innovative and customised process solutions Certi昀cates, regional approvals and ATEX conformity James Bramhall, Regional Sales Manager Phone: +44 7787 570469 E-Mail: james.bramhall@aerzen.com Web: www.aerzen.com
RkJQdWJsaXNoZXIy MjQ0NzM=