April 2021

APRIL 2021 AFTERMARKET 33 Above: Fig. 2 Right: Fig.1 www.aftermarketonline.net bottle of JLM Extreme Clean to a full tank of fuel and took the car on the road to monitor some more live data and watch the Extreme Clean work its magic on the DPF system during regeneration. By the end of the road test the DPF pressures were down to single figures which is just what we would expect from a three-stage clean. To finish the job, we added a bottle of JLM Engine Oil Flush to the engine and carried out an oil and filter change to ensure any chemical from the intake clean was not in the engine’s vital organs (See Fig.3). Our customer was absolutely delighted given he was expecting the worst after the previous garage had tried twice to fix. We use the Engine Oil Flush and an Emissions treatment on every vehicle we service. Customers always comment on the increased MPG and how clean the oil is after the flush has been used. We have used JLM Lubricants’ products since we opened our garage doors in July 2020. I am pleased to report that we have never been let down by the quality and with the support received from Kalimex, UK distributors of JLM, Darren Darling, Founder of the DPF Doctor Network, or even JLM Managing Director Gilbert Groot. The support in our network is absolutely second to none. JLM products used Diesel Intake Extreme Cleaning Toolkit J02280 and J02285: This is a highly effective yet simple way to clean the entire combustion and exhaust system on a neglected diesel engine. With this low-cost kit you can quickly restore performance and reduce emissions. Developed in collaboration with diesel professionals including Darren Darling, the system delivers a controlled dose of powerful Our customer was absolutely delighted given he was expecting the worst after the previous garage had tried... ” clean and flush fluids that gently decontaminate the air intake, combustion chamber, valves, injectors, and variable turbo vanes of a dirty diesel engine. No removal required. It is much more powerful than an additive added to the fuel tank or an aerosol air intake spray. Used with the two dedicated and chemically advanced cleaning fluids, each one addressing different contaminations to restore the original air flow to the engine. Extreme Clean J02360: A very strong all-in-one blend of high-end chemicals to detox the entire fuel system including turbo, EGR and DPF. Engine Oil Flush J04835: This gets the most out of new oil by cleaning out more dirt and contamination when changing the old oil and when used regularly, will not allow the build-up of dirt to develop again. It reduces fuel consumption and improves engine performance. Emission Reduction Treatment J02370: A shot of this additive in the fuel tank will reduce the emissions and help to prevent a MOT emission fail or resolve a post-MOT emission fail. It also helps keep the exhaust and CAT clean. For more information visit www.jlmlubricants.com and www.the-dpf-doctor.com